Download LatinVFR Lima SPIM Scenery for FSX and FS9 - Full Version
LatinVFR HUB SPIM LIMA PERU FSX: A Review
If you are looking for a realistic and detailed scenery of one of the most important airports in South America, you might want to check out LatinVFR's Lima Peru Jorge Chavez International Airport (SPIM) for FSX and FS9. This scenery covers not only the airport itself, but also the surrounding area of Lima, with photo scenery, mesh, autogen, landmarks, and more. In this review, we will take a closer look at what this scenery has to offer, how to install and configure it, how it performs on different systems, and how it compares to other similar products.
LatinVFR HUB SPIM LIMA PERU FSX FULL torrent
Introduction
What is LatinVFR HUB SPIM LIMA PERU FSX?
LatinVFR is a well-known developer of flight simulation sceneries, especially for Latin America. They have created many popular airports such as Miami, San Diego, Santiago de Chile, Caracas, San Jose Costa Rica, and more. Their latest product is Lima Peru Jorge Chavez International Airport (SPIM), which is available for both FSX and FS9.
Lima Peru Jorge Chavez International Airport is the main international airport of Peru, located in the city of Callao, about 10 kilometers from the center of Lima. It was opened in the early 1960s and has since undergone several expansions and renovations, making it one of the most modern terminals in South America. It serves as a hub for half a dozen airlines, including LATAM Peru, Avianca Peru, Sky Airline Peru, Viva Air Peru, Star Peru, and Peruvian Airlines. It also receives flights from European, North American, and Latin American carriers.
The airport has two runways: 15/33 (3,480 meters) and 03/21 (2,240 meters). The main terminal has four concourses: North Pier (international flights), South Pier (domestic flights), Central Pier (mixed flights), and Remote Pier (low-cost flights). The airport also has a cargo terminal, a general aviation terminal, a military terminal, a VIP terminal, and several hangars.
Why is Lima Peru Jorge Chavez International Airport (SPIM) important?
Lima Peru Jorge Chavez International Airport is not only important for Peru's economy and tourism, but also for the flight simulation community. It is one of the most challenging and diverse airports in South America, offering a variety of flight scenarios and experiences.
Some of the challenges that pilots face when flying to or from SPIM are:
The high altitude of the airport (34 meters above sea level) and the surrounding mountains (up to 5,000 meters) affect the aircraft performance and navigation.
The frequent fog and low visibility conditions require precision approaches and instrument landing systems.
The busy traffic and complex airspace require careful coordination with air traffic control and other aircraft.
The diverse destinations and routes offer a wide range of flight durations and environments.
Some of the experiences that pilots can enjoy when flying to or from SPIM are:
The stunning views of the Pacific Ocean, the Andes Mountains, the Amazon Rainforest, and the city of Lima.
The realistic representation of the airport's buildings, facilities, vehicles, signs, lights, etc.
The immersive atmosphere created by the custom sounds, animations, effects, etc.
The dynamic environment created by the seasonal changes, weather variations, day/night cycles, etc.
What are the main features of the scenery?
According to LatinVFR's website, some of the main features of their Lima Peru Jorge Chavez International Airport scenery are:
SPIM (LIM) airport with all its buildings done with accurate detail
Surroundings extremely detailed
More than 200sq Kilometers of photo scenery with thousands of hand placed custom autogen
Mesh for the entire area of Lima
Terminal gates with docking guidance systems
High resolution ground textures for runways, taxiways, apron etc
Revised land classes for surrounding photo scenery
Main buildings in Downtown Lima
Inclusion of manual in PDF format
Inclusion of charts and maps
Birds (FSX)
Vehicle animations (FS2004) and native (FSX)
Excellent night lighting
Dozens of custom apron objects (containers, vehicles, etc)
Respective AFCAD for FS2004 and AFX file for FS making it fully AI traffic compatible
DX9 compatible for FSX
Inclusion of charts in PDF format
Auto Installer adding automatically to the scenery library in FS
: http://www.pcaviator.com.au/store/Lima-Peru-Jorge-Chavez-International-Airport-SPIM.html
Installation and Configuration
How to download and install the scenery?
The scenery can be purchased from various online stores such as SimMarket, PC Aviator, FlightSim Store, etc. The price varies depending on the store but it is usually around $28 USD. The download size is about 209 MB.
The installation process is very simple and straightforward. After downloading the file from your chosen store, you just need to run the executable file (.exe) and follow the instructions on screen. The installer will automatically detect your FS version (FSX or FS9) and add the scenery to your library. You will also have an option to install some additional files such as charts or manuals.
: http://secure.simmarket.com/latinvfr-lima-peru-spim.phtml : https://www.flightsimstore.com/product_info.php?products_id=1958 How to adjust the settings and options?
The scenery comes with a configuration tool that allows you to customize some aspects of it according to your preferences and system performance. You can access this tool by going to Start Menu > Programs > LatinVFR > Lima SPIM > Scenery Configurator.
The configuration tool has four tabs: General Options, Airport Options, Surroundings Options, and Credits. Each tab has several checkboxes that you can tick or untick depending on what you want to enable or disable. For example, you can choose whether to use high resolution textures, dynamic shadows, animated vehicles, custom sounds, etc. You can also adjust the density of autogen, traffic, and birds. The tool will show you the estimated impact of each option on your frame rate (FPS).
You can experiment with different combinations of settings until you find the optimal balance between realism and performance for your system. You can always restore the default settings by clicking on the Restore Defaults button. You can also save your current settings by clicking on the Save button. You will need to restart your simulator for any changes to take effect.
Scenery Overview
Airport Layout and Buildings
The airport layout and buildings are very well modeled and textured, reflecting the real appearance and condition of SPIM. The terminal building has four concourses: North Pier, South Pier, Central Pier, and Remote Pier. Each concourse has its own design, color scheme, and signage. The gates are numbered and labeled correctly, for bird animations but uses a custom module called BIRDS to enable them. This module requires manual installation and configuration but also allows more control over the bird settings.
The performance of the scenery depends largely on your system specifications and settings. The scenery is quite complex and detailed, so it may have a significant impact on your frame rate and loading time. However, you can use the configuration tool to adjust the settings and options to optimize the performance according to your system capabilities and preferences.
How does the scenery work with AI traffic and other add-ons?
The scenery is fully compatible with AI traffic and other add-ons. The scenery includes respective AFCAD for FS2004 and AFX file for FSX, which define the parking positions, taxi routes, runway usage, etc. for AI traffic. The scenery also includes realistic ground markings, signs, lights, etc. for AI traffic guidance. The scenery works well with default AI traffic as well as third-party AI traffic packages such as World of AI, Ultimate Traffic, Traffic X, etc.
The scenery also works well with other add-ons such as weather engines, mesh add-ons, land class add-ons, etc. However, you may need to adjust the priority order of the scenery layers in your simulator to avoid conflicts or overlaps with other add-ons. For example, you may need to place the LatinVFR Lima SPIM layer above any other mesh or land class layer in your scenery library.
Conclusion
Pros and Cons
LatinVFR HUB SPIM LIMA PERU FSX is a high-quality scenery that offers a realistic and immersive representation of one of the most important airports in South America. The scenery covers not only the airport itself but also the surrounding area of Lima, with photo scenery, mesh, autogen, landmarks, and more. The scenery has many features and details that enhance the visual quality and atmosphere of the airport and its environment.
Some of the pros of this scenery are:
The accurate and detailed modeling and texturing of the airport buildings and facilities
The realistic and diverse photo scenery and autogen of Lima's landscape and environment
The inclusion of some of Lima's main landmarks in 3D
The terminal gates with docking guidance systems that work with compatible aircraft
The excellent night lighting effects
The custom sounds, animations, effects, etc. that add more life and movement to the airport
The configuration tool that allows you to customize some aspects of the scenery according to your preferences and system performance
The compatibility with AI traffic and other add-ons
Some of the cons of this scenery are:
The high system requirements and potential impact on frame rate and loading time
The need for manual installation and configuration of some modules such as BGLMAN or BIRDS for FS9 users
The lack of dynamic shadows, water reflections, etc. for FS9 users
The possible conflicts or overlaps with other add-ons if not properly ordered in the scenery library
Final Verdict
In conclusion, LatinVFR HUB SPIM LIMA PERU FSX is a great scenery that deserves a place in your simulator. It offers a realistic and immersive experience of flying to or from one of the most challenging and diverse airports in South America. It also gives you the opportunity to explore and enjoy the beauty and culture of Lima, the capital and largest city of Peru. The scenery has a lot of features and details that make it stand out from other sceneries, but also requires a lot of system resources and careful configuration. If you are looking for a high-quality scenery of SPIM, you should definitely give this one a try.
FAQs
Here are some frequently asked questions about LatinVFR HUB SPIM LIMA PERU FSX:
Q: How much does the scenery cost?A: The scenery costs around $28 USD depending on the store where you buy it.
Q: How can I buy and download the scenery?A: You can buy and download the scenery from various online stores such as SimMarket, PC Aviator, FlightSim Store, etc.
Q: How can I install and configure the scenery?A: You can install the scenery by running the executable file (.exe) that you downloaded from your chosen store. You can configure the scenery by using the configuration tool that comes with it.
Q: How can I optimize the performance of the scenery?A: You can optimize the performance of the scenery by adjusting your system specifications and settings, as well as using the configuration tool to enable or disable some options.
Q: How can I avoid conflicts or overlaps with other add-ons?A: You can avoid conflicts or overlaps with other add-ons by adjusting the priority order of the scenery layers in your simulator's scenery library.
